Bruker B-ACS 120, Installation Manual

Page: 42 / 167

42 (167) BRUKER Installation Manual Version 001
Software Commands
Standard Commands
Table 7.1. Standard Commands
Instruction: AP ( A uto P rep)
Format: AP<CR>
Description: AutoPrep and barcode reader present test.
Reply: <CR><LF>
______________________________________________________________
Instruction: EJ ( EJ ect)
Format: EJ<CR>
Description: Get sample from shim system and insert it in the magazine.
Reply: <CR><LF>
______________________________________________________________
Instruction: HO ( HO me)
Format: HO<CR>
Description: The sample changer arm moves to its „HOME“ position over
the magazine. If a sample is in the pincher, it is placed in the
magazine when the given position is free
Reply: <CR><LF>
______________________________________________________________
Instruction: IJ ( I n J ect)
Format: IJ XXX<CR>
Description: Get sample from position XXX from the magazine and insert it
in the shim system.
Reply: <CR><LF>
______________________________________________________________
Instruction: NM (total N umber of M agazine positions)
Format: NM<CR>
Description: Report the number of available magazine positions.
Reply: N<number><CR><LF>
______________________________________________________________
Instruction: RP ( R eport P osition)
Format: RP<CR>
Description: Read actual magazine position.
Reply: P<number><CR><LF>