BRP SEA-DOO Search and Rescue Series 2017, Operator'S Manual

Page: 15 / 164

ACTIVE TECHNOLOGIES (iCONTROL)
Introduction
iControl TM (intelligent Control sys-
tems) provides an environment
whereby the operator can control
many systems without taking his
hands off the handlebars.
All controls are at the operator's finger
tips and activated by pressing a button
or pulling a lever. The operator's atten-
tion can thus remain focused on the
water and driving the watercraft.
Each control is electronic and provides
a command signal to an electronic
module whose function is to assure
proper operation of its system within
set parameters.
The various systems grouped under
iControl are the:
– iTC TM (intelligent Throttle Control)
– iBR (intelligent Brake and Reverse)
(models with iBR)
– O.T.A.S. (Off Throttle Assisted
Steering).
These systems function together to
provide features such as cruise mode,
slow speed mode and braking, im-
proved watercraft response to opera-
tor inputs, increased maneuverability
and control.
It is extremely important for operators
to read all information contained in this
Operator's Guide so as to become fa-
miliar with this watercraft, its systems,
controls, capabilities and limitations.
iTC (intelligent Throttle
Control)
The system uses an electronic throttle
control (ETC) that provides command
signals to the ECM (Engine Control
Module). With this system, there is no
need for a traditional throttle cable.
The iTC allows the following operating
modes:
– Sport mode (default setting)
– Touring mode
– ECO mode
– Cruise mode
– Slow speed mode
The O.T.A.S. TM (Off Throttle Assisted
Steering) is also controlled by the iTC.
Sport Mode
The Sport mode is the default riding
mode.
In sport mode, maximum engine
power is available throughout the en-
gine operational range.
Refer to OPERATING MODES subsec-
tion for detailed instructions.
Touring Mode
In Touring mode, available engine
power and acceleration is reduced
when accelerating from a complete
stop and when operating in the low
engine power range under certain con-
ditions.
Refer to OPERATING MODES subsec-
tion for detailed instructions.
ECO Mode
When ECO mode is selected (fuel
economy mode), engine RPM is lim-
ited whereby an optimal cruising
speed is maintained in order to reduce
fuel consumption.
Refer to OPERATING MODES subsec-
tion for detailed instructions.
Cruise Mode
Cruise mode allows the operator to set
a desired maximum speed of the wa-
tercraft.
Cruise mode limits watercraft speed
but does not maintain it. The oper-
ator must hold the throttle lever de-
pressed to maintain forward speed,
unlike an automotive type cruise con-
trol which maintains a constant speed
while throttle pedal is released.
________
SAFETY INFORMATION
________
13
https://www.boat-manuals.com/