background image

BRP LIMITED WARRANTY – USA AND CANADA:
2017 SEA-DOO

®

PERSONAL WATERCRAFT

1. SCOPE

Bombardier Recreational Products Inc. (“BRP”)* warrants its model-year 2017
Sea-Doo personal watercraft sold by authorized BRP Dealers (as defined below)
in the United States of America (“USA”) and in Canada from defects in material
or workmanship for the period and under the conditions described below. This
limited warranty will become null and void if: (1) the Sea-Doo personal watercraft
was used for racing or any other competitive activity, at any point, even by a pre-
vious owner; or (2) the Sea-Doo personal watercraft has been altered or modified
in such a way so as to adversely affect its operation, performance or durability, or
has been altered or modified to change its intended use.

2. LIMITATIONS OF LIABILITY

THIS WARRANTY IS EXPRESSLY GIVEN AND ACCEPTED IN LIEU OF ANY
AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING
WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR FIT-
NESS FOR A PARTICULAR PURPOSE. TO THE EXTENT THAT THEY CANNOT
BE DISCLAIMED, THE IMPLIED WARRANTIES ARE LIMITED IN DURATION
TO THE LIFE OF THE EXPRESS WARRANTY. INCIDENTAL AND CONSE-
QUENTIAL DAMAGES ARE EXCLUDED FROM COVERAGE UNDER THIS
WARRANTY. SOME STATES/PROVINCES DO NOT ALLOW FOR THE DIS-
CLAIMERS, LIMITATIONS AND EXCLUSIONS IDENTIFIED ABOVE, AS A
RESULT, THEY MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU
SPECIFIC RIGHTS, AND YOU MAY ALSO HAVE OTHER LEGAL RIGHTS
WHICH MAY VARY FROM STATE TO STATE, OR PROVINCE TO PROVINCE.

Neither the distributor, any BRP dealer nor any other person has been authorized
to make any affirmation, representation or warranty regarding the product, other
than those contained in this limited warranty, and if made, shall not be enforceable
against BRP. BRP reserves the right to modify this warranty at any time, being un-
derstood that such modification will not alter the warranty conditions applicable to
the products sold while this warranty is in effect.

3. EXCLUSIONS – ARE NOT WARRANTED

The following are not warranted under any circumstances:

– Normal wear and tear;
– Routine maintenance items, tune ups, adjustments;
– Damage caused by failure to provide proper maintenance and/or storage, as de-

scribed in the Operator’s Guide;

– Damage resulting from removal of parts, improper repairs, service, mainte-

nance, modifications or use of parts not manufactured or approved by BRP or
resulting from repairs done by a person that is not an authorized servicing BRP
dealer;

– Damage caused by abuse, abnormal use, neglect, or operation of the product in

a manner inconsistent with the recommended operation described in the Oper-
ator’s Guide;

– Damage resulting from accident, submersion, fire, theft, vandalism or any act of

God;

130

______________

https://www.boat-manuals.com/

Summary of Contents for SEA-DOO Search and Rescue Series 2017





































































































































































Reviews: