BRP SEA-DOO Search and Rescue Series 2017, Operator'S Manual

Page: 125 / 164

TROUBLESHOOTING GUIDELINES
ENGINE LACKS ACCELERATION OR POWER (cont’d)
8. Low fuel pressure.
– Seek service from an authorized Sea-Doo dealer, repair shop, or person of
your own choosing for maintenance, repair, or replacement. Please refer
to the US EPA EMISSIONS-RELATED WARRANTY contained herein for
information about warranty claims.
9. Water in fuel.
– Siphon and replace.
10.Engine damaged by water ingestion.
– Refer to an authorized Sea-Doo dealer.
WATERCRAFT CANNOT REACH TOP SPEED
1. Jet pump water intake clogged.
– Clean. Refer to JET PUMP WATER INTAKE AND IMPELLER CLEANING in
SPECIAL PROCEDURES subsection.
2. Damaged impeller or worn-out wear ring.
– Replace. Refer to an authorized Sea-Doo dealer.
3. Engine management system fault detected (check engine pilot lamp is
ON).
– Refer to MONITORING SYSTEM.
WATERCRAFT STAYS IN NEUTRAL AFTER OPERATING THE IBR LEVER
1. The iBR gate stays in neutral.
– Release the throttle to idle RPM.
– Press the CRUISE button to activate the slow speed mode.
– Return to shore using the slow speed mode. Refer to an authorized Sea-Doo
dealer.
iBR WILL NOT RETURN TO NEUTRAL POSITION (IBR INDICATOR LIGHT ON)
1. iBR jammed with debris.
– Clean and check for damage in the iBR gate and nozzle area.
2. iBR system malfunction.
– Remove tether cord and wait 5 minutes.
– Press START/STOP button.
– Install tether cord and check iBR light to ensure fault is cleared.
– Refer to an authorized Sea-Doo dealer if fault persists or reoccurs frequently.
iBR WILL NOT RETURN TO NEUTRAL POSITION (IBR FAULT INDICATOR OFF)
1. Throttle lever not fully released during operation.
– Release throttle lever fully to ensure iBR gate returns to neutral.
2. Throttle lever does not fully return to null when released.
– Refer to an authorized Sea-Doo dealer.
______________
123
https://www.boat-manuals.com/