BRP SEA-DOO Search and Rescue Series 2017, Operator'S Manual, Page: 109 / 164

WATERCRAFT CARE
Post-Operation Inspection
It is important to check the following after riding the watercraft, especially if it was
used in shallow water. This will ensure that the watercraft is ready and in proper
condition for the next outing.
WARNING
The post-operation inspection can help you monitor wear and deterioration
before they become a problem. Correct any problems that you discover
to reduce the risk of a breakdown for the next outing. See an authorized
Sea-Doo dealer as necessary.
WARNING
Engine should be off and the tether cord cap should always be removed
from the engine cut-off switch prior to verifying any of the following points.
ITEM OPERATION
✓
Hull
Inspect hull integrity. Check also condition
of the protective coating.
Jet pump water intake grate
Inspect/clean. Refer to
MAINTENANCE
PROCEDURES
subsection.
Jet pump
Inspect impeller condition and wear ring
clearance (when used in shallow water).
Fuel tank
Refill. Refer to
FUELING
subsection.
Engine compartment
Check for any visible fluid leaks
and gasoline vapor odor. Refer to
MAINTENANCE PROCEDURES
subsection.
Engine oil level
Check/refill. Refer to
MAINTENANCE
PROCEDURES
subsection.
Engine coolant level
Check/refill. Refer to MAINTENANCE
PROCEDURES
subsection.
Front bumper Check condition.
______________
107
https://www.boat-manuals.com/