BRP SEA-DOO Search and Rescue Series 2017 Operator'S Manual Download Page 36 | Manualshive

Page: 36 / 164

BRP SEA-DOO Search and Rescue Series 2017 Operator'S Manual Download Page 36

PRE-RIDE INSPECTION

Drain Plugs

Secure bilge drain plugs.

smo2009-002-135_a

TYPICAL - BILGE DRAIN PLUG LOCATIONS

1. Bilge drain plugs
2. Tighten
3. Untighten

WARNING

Ensure bilge drain plugs are prop-
erly secured prior to launching the
watercraft in water.

Steering System

Assisted by another person, check
steering operation for free movement.

When the handlebar is horizontal,
the jet pump nozzle should be in the
straight ahead position. Ensure the jet
pump nozzle pivots easily and in the
same direction as the handlebar (e.g.:
when handlebar is turned to the left,
the nozzle opening must point towards
the LH side of watercraft).

WARNING

Check handlebar and correspond-
ing steering nozzle operation be-
fore starting. Never turn handle-
bar while someone is near the rear
of the watercraft. Keep away from
steering moving parts (nozzle, iBR
gate, linkages etc.).

Throttle Lever

Check the Electronic Throttle Control
lever (ETC) for free and smooth opera-
tion. It should return to its initial posi-
tion immediately after it is released.

WARNING

Check throttle lever operation be-
fore starting the engine. If any fric-
tion is felt in the throttle lever, refer
to an authorized Sea-Doo dealer.

iBR Lever

Check the iBR lever for free and
smooth operation. It should return
to its initial position immediately after
it is released.

WARNING

Check iBR lever operation before
starting the engine. If any friction
is felt in the iBR lever, refer to an
authorized Sea-Doo dealer.

Storage Compartment, Glove Box
and Seat

Ensure all required safety and survival
equipment and any additional cargo is
properly stored in the storage compart-
ment provided.

Ensure the front cover, glove box, and
seat are closed and latched.

WARNING

Ensure the seat, glove box, and
front storage compartment cover
are securely latched.

Inflatable Sponsons and Running
Boards

Check condition and solidity of the in-
flatable sponsons and running boards.

Check air pressure in inflatable spon-
sons. Adjust to specfication:

SPONSON PRESSURE

MINIMUM

MAXIMUM

28 kPa (4 PSI)

41 kPa (6 PSI)

NOTE:

Exterior air temperature and

sun affect air pressure; always read-
just accordingly.

34

_______

SAFETY INFORMATION

________

https://www.boat-manuals.com/

«
...
34
35
36
37
38
...
»

Summary of Contents for SEA-DOO Search and Rescue Series 2017





































































































































































Reviews:

No comments