PARTS TO BE INSTALLED
Seats
tbl2011-0011-035_a
1. Driver's seat
2. Passenger's seat
3. Latch to release the seat
1. Insert the seat in the cockpit.
2. Install the seat support into retaining brackets.
3. Push down the backrest to latch the seat.
Seat Latch Adjustment
If the seat is hard to lock, the seat latch pin must
be readjusted.
Loosen retaining screws and reposition the seat
latch pin.
tbl2011-001-062
Half Windshield (LTD Models)
REQUIRED PARTS
QTY
Half windshield
2
Hal windshield installation kit
(from predelivery box #1)
1
1. Install windshield on a clean, non abrasive sur-
face with the interior facing up.
2. Install a neoprene seal on LH and RH side along
the straight edges of the windshield.
tsi2011-009-004_a
1. Neoprene seal
3. Turn windshield upside down to have outside
facing up.
4. Push the strap holders to snap into the slots in
windshield.
tsi2011-009-012
tbl2012-003-025
5. Install windshield supports at the bottom of
windshield as per the following illustrations.
NOTE:
Ensure windshield support is properly
seated against windshield.
PREDELIVERY
2014-2
29 / 54