UNCRATING
tbl2013-005-004_a
1. Tail gate
10. Cut the front and rear of crate base.
tbl2011-001-055
FRONT OF VEHICLE
tbl2011-001-056
REAR OF VEHICLE
11. Prepare 4 pieces of wood:
– 2 pieces of 2x6 by 1.78 m (70 in)
– 2 pieces of 2x6 by 1.27 m (50 in)
12. Install the jack under a frame member, in line
with a suspension arm.
tbl2011-001-057
13. Lift the front of vehicle just enough to place
the pieces of wood (1.78 m (70 in)) between
wheel and base crate, as illustrated below.
tbl2011-001-023_a
1. 2x6 by 1.78 m (70 in)
2. Crate braces
NOTE:
Position the 2x6 over crate braces. The
rear of the 2x6 must be halfway on brace.
tbl2011-001-058_a
1. 2x6
2. Crate braces
14. Lower the front of the vehicle and repeat the
procedure at the rear.
14.1 Place the jack under the hitch to lift the
rear of the vehicle.
8 / 54
2014-2
PREDELIVERY