B.U.D.S. PROGRAMMING
3. Connect one end of the MPI-2 diagnostic cable
to the vehicle connector.
tbl2011-001-061
4. Connect the other end of diagnostic cable to the
MPI-2 interface card.
vdd2006-001-151
DIAGNOSTIC CABLE CONNECTED TO MPI-2 INTERFACE CARD
NOTE:
An optional
MALE-FEMALE EXTENSION SE-
RIAL CABLE (P/N DB9)
available at electronic retail
outlets can be used between diagnostic cable and
MPI-2 interface. Do not exceed 7.6 m (25 ft).
529035697
OPTIONAL MALE-FEMALE EXTENSION SERIAL CABLE
5. Connect the MPI-2 interface card to the USB
port of a PC (personal computer).
mmr2006-079-200
MPI-2 INTERFACE CARD CONNECTED TO USB PORT
How to Establish
Communication Using B.U.D.S.
Software
NOTE:
Before beginning, check if the latest ver-
sion of B.U.D.S., available on BOSSWeb for this
vehicle, is installed on your computer.
IMPORTANT:
Ensure all connections have been
made
before starting B.U.D.S.
to allow proper
operation.
1. Turn ignition switch to ON using any of the key
provided with the vehicle. DO NOT start the
engine.
2. Start B.U.D.S. and logon.
3. Wait during detection setup.
4. Ensure the status bar shows the Kw2000 pro-
tocol and the appropriate number of modules to
its right according to the vehicle model.
tmr2011-019-002_a
TYPICAL - SUCCESSFUL CONNECTION
1. Connection protocol
2. Number of modules read
5. Click the
Read Data
button.
38 / 54
2014-2
PREDELIVERY
