PARTS TO BE INSTALLED
TORQUE
M6 x 25 Torx screws
Hand torque
tbl2012-003-026_a
OUTSIDE FACING UP
1. Windshield support
2. M6 x 25 Torx screw
3. Stainless steel washer
tbl2012-003-027_a
1. Windshield support
2. M6 x 25 Torx screw
3. Stainless steel washer
tbl2012-003-028_a
INTERIOR FACING UP
1. Windshield support
2. M6 elastic flange nut
6. Install the windshield on vehicle.
6.1 Install a piece of masking tape under each
windshield support to avoid scratching the
hood.
tbl2012-003-029_a
1. Pieces of masking tape
6.2 Position the bottom of windshield at
7 mm to 10 mm (9/32 in to 3/8 in)
from
hood.
tbl2012-003-030
6.3 Using a 6.4 mm (1/4 in) drill bit and wind-
shield support as template, drill 2 holes
through the hood.
NOTICE
Retain the drill to avoid damag-
ing the air intake silencer.
tbl2012-003-031
6.4 Secure windshield supports using M6 x
20 Torx screws and M6 elastic flange nuts
(from half windshield installation kit)
30 / 54
2014-2
PREDELIVERY
