PARTS TO BE INSTALLED
TORQUE
M6 x 20 Torx
screws
10 N•m (89 lbf•
in
)
tbl2012-003-032
7. Secure half windshield using the four straps.
8. Remove the plastic protective film from the
windshield.
Mirrors (CE Models Only)
LH Mirror
All except LTD
1. Assemble the LH mirror on its adaptor.
1.1 Insert threaded rod of mirror into adaptor
hole.
1.2 Secure mirror using M8 lock washer and
M8 nut. Do not torque yet.
tbl2011-001-065_a
1. LH mirror
2. Adaptor
3. M8 lock washer
4. M8 nut
2. Install the LH mirror on cage post.
2.1 Install the U bracket around the LH cage
post.
2.2 Install the mirror between U bracket ends.
2.3 Secure them using M6 x 45 Torx screws,
M6 flat washers and M6 cap nuts. Do not
torque yet.
tbl2011-001-066_a
1. U bracket
2. M6 x 45 Torx screw
3. M6 flat washer
4. M6 cap nut
3. Position mirror as per owner preference and
tighten all nuts.
PART
TORQUE
Mirror nut
24.5 N•m (18 lbf•ft)
PART
TORQUE
M6 cap nut
10 N•m (89 lbf•
in
)
LH Mirror
LTD Models
1. Remove and keep nut from the bottom of the
LH mirror assembly pivoting pole.
tsi2012-007-008_a
REMOVE NUT FROM LH MIRROR ASSEMBLY
2. Insert LH mirror assembly pivoting pole into
mirror bushing.
PREDELIVERY
2014-2
31 / 54
