PARTS TO BE INSTALLED
3. Hold the strap holder in this position and re-
move rear speaker box from cage to tighten
strap holder screws.
TORQUE
Strap holder screws
0.5 N•m (4 lbf•
in
)
4. Install an open clamp into slot in rear speaker
box.
5. Position the rear speaker box on cage.
6. Secure the open clamp with K50 screws (from
the rear speaker installation kit).
TORQUE
Rear speaker screws
2.5 N•m (22 lbf•
in
)
7. Attach the strap around cage tube
tbl2012-003-022
8. Route the rear speaker harness along the cage
tube and secure it using rear wind screen
straps.
tbl2012-003-023
9. Connect rear speaker.
9.1 Connect rear speaker connector with vehi-
cle connector.
9.2 Route harnesses around rear lateral panel
posts.
9.3 Position connectors between post.
tbl2012-003-024_a
1. Connectors between posts
2. Rear speaker harness
3. Vehicle harness
10. Reinstall support plate using previously re-
moved K50 x 16 Torx screws. Make sure to
install square foam behind support plate.
tbl2014-003-004_a
TYPICAL
1. Foam
PARTS
TORQUE
K50 x 16 Torx screws
(previously removed)
Hand torque only
11. Repeat on the other side.
28 / 54
2014-2
PREDELIVERY