Cooking with Gas
Page 16
For Portable LP-Gas Connection
The cabinet has an opening in the bottom panel that allows a 20 lb. gas tank bottom flange to drop into
place. This will help to lock the tank. Before installing your gas tank, lift up the tank ring (as shown in
Fig. 31a). After positioning the tank in the opening, lower the tank ring to lock the tank. Use only 20
lb. gas tank (See LP Gas Safety Requirements for Additional Information).
As shown in Fig. 31b, it
is unsafe to operate the grill if the gas tank is not vertical.
Fig. 31a Fig. 31b
WARNING: The Type I connective coupling (see Fig. 34) supplied with your grill must not be
replaced with a different type of grill/tank connection system. Removal will result in loss of
warranty, gas leakage, fire and severe bodily harm.
Fig.32
The propane tank valve connection supplied with this grill incorporates four important safe guards,
Hand Assembly, Hand Disassembly, Excess Flow Control and Temperature-Activated Shut-Off.
a. Hand Assembly:
1. Make certain the tank valve and all the appliance valves are in the “OFF” positions.
2. When connecting the regulator/burner valve assembly to the tank valve, turn the large plastic nut
clockwise until it stops.
3. Gas will not flow unless the plastic nut is completely connected.
4. HAND TIGHTEN ONLY.
b. Hand Disassembly:
1. Make certain the tank valve and all the appliance valves are in the “OFF” positions.
2. Turn the large plastic nut counterclockwise until it is disassembled.
H A N D
W H E E L
T Y P E 1
V A L V E
T H E R M A L L Y
S E N S I T I V E N U T
E X T E R N A L
T H R E A D
P R O P A N E
R E G U L A T O R
Tank Ring
Summary of Contents for BR4GRILL
Page 103: ......
Page 104: ...Distributed By Camp Chef P O Box 4057 Logan UT 84323 Printed in China ...
