Brother TD-2020A, User Manual

Page: 31 / 98

Printer Setting Tool
25
3
IPv6
3
• Static IPv6 Address
Specify a permanent IPv6 address.
• Enable this address
Enables the specified static IPv6 address.
• Primary DNS Server IPv6 Address/
Secondary DNS Server IPv6 Address
Specify the DNS server IPv6 addresses.
• IPv6 Address List
Displays the list of IPv6 addresses.
Wired 802.1x Authentication
3
Configure IEEE 802.1x authentication.
• Wired 802.1x Status
Enable or disable IEEE 802.1x authentication
for wired networks.
• Authentication Method
Select the authentication method.
• User ID/Password
With EAP-TLS, it is not necessary to register a
password, but you must register a client
certificate. To register a certificate, connect to
the printer from a web browser, and then
specify the certificate. You can also install the
authentication certificate in the Printer Setting
Tool using the menu bar:
File > Install
Certificates .
Wireless Settings
3
• Communication Mode
Displays the available communications modes.
• SSID (Network Name)
Click Search to display available SSIDs.
• Channel
Displays the automatically selected channel.
• Authentication Method/Encryption Mode
The supported encryption modes for the
authentication methods are shown in the table
below.

Authentication
Method Encryption Mode
Open System None
WEP
Shared Key WEP
WPA3-SAE AES
WPA/WPA2-PSK/
WPA3-SAE TKIP + AES
AES
EAP-FAST/NONE TKIP
AES
EAP-FAST/
MS-CHAPv2 TKIP
AES
EAP-FAST/GTC TKIP
AES
PEAP/MS-CHAPv2 TKIP
AES
PEAP/GTC TKIP
AES
EAP-TTLS/CHAP TKIP
AES
EAP-TTLS/MS-CHAP TKIP
AES
EAP-TTLS/MS-
CHAPv2 TKIP
AES
EAP-TTLS/PAP TKIP
AES
EAP-TLS TKIP
AES