Brother TD-2020A, User Manual

Page: 93 / 98

87
11
11
Use the (optional) Label Peeler to print labels
automatically and peel off the label backing
before they are fed out of the media exit slot.
Follow the procedure below to load the
correct paper.
For more information on attaching the label
peeler (optional), see its instruction manual.
Inserting the Media Roll
11

When using the peeling function of the
label peeler to peel off labels while
printing:
a
Press and hold the (Power) button to
turn the printer off.
Press the cover release lever (1) on
either side and lift to open the Media Roll
compartment top cover.
b
Open the media guides by lifting the
media guide adjustment lever (1) and
pulling the media guides outwards.
NOTE
The media guides are shipped fully open
from the factory.
Using the Label Peeler
(Optional: PA-LP-001)
(TD-2125N/TD-2135N/
TD-2125NWB/TD-2135NWB only)
11
Before using the label peeler, the
setting for using the label peeler must
be specified in the printer driver. For
more information, see
Printer Driver
Settings on page 90.
 We recommend to use genuine
Brother roll media.
 Be sure to use die-cut labels. Do not
use any other labels.
1
1