2.
Feed Key Function
Select the operation that is performed when the
(Feed) button is pressed.
If [
Program Settings
] is selected, click the [
File
] button and select the command file.
Available settings: [
Feed
], [
Program Settings
]
3.
Printer Information Report
Select which sections are printed when printing the printer setup information.
Available settings: [
All
], [
Usage Log
], [
Printer Settings
], [
Printer Transfer Data
]
4.
Beeper
Select whether the printer beeps when an operation panel button is pressed.
Available settings: [
On
], [
Off
]
5.
Serialize Mode
Select whether or not to serialize from the last number printed.
Available settings: [
Cont From Last
], [
From Starting#
]
6.
Save Printer Print Log
Select whether or not to save the printer’s print log. If [
Disable
] is selected, [
Tools
] - [
Save Print Log in File
] cannot be performed.
Available settings: [
Enable
], [
Disable
]
7.
Print Data after Printing
Select whether or not print data is erased automatically after it is printed.
Available settings: [
Erase All Print Data
], [
Keep Print Data
]
Sensor Adjustment Tab
If RD Rolls are being used, it is unnecessary to adjust the sensors.
1.
Disable these settings
When this check box is selected,
appears in the tab, and the settings can no longer be specified or changed.
The settings in a tab where
appears will not be applied to the printer even if [
Apply
] is clicked. In addition, the settings in the tab will not be saved or exported when the [
Save in Command File
] or
[
Export
] command is executed.
To apply the settings to the printer or save or export them, be sure to clear the check box.
2.
Media Sensor (Transmissive/Gap) (RJ-3150/3150Ai only)
If RJ-3050/3050Ai was selected for [
Printer
], this item is unavailable. The following transmissive/gap sensor parameters can be adjusted.
[Detection Sensitivity]
Adjust the precision of the sensor that detects the gaps (spacing) for die-cut labels
Available settings: -2–+2
[Luminescence Adjustment]
Adjust the amount of light emitted by the transmissive/gap sensor.
Available settings: -2–+2
3.
Media Sensor (Reflective/Bar)
The following reflective/black mark sensor parameters can be adjusted.
[
Mark Detection Sensitivity
]
Adjust the precision of the sensor that detects the black marks.
Available settings: -2–+2
[
Luminescence Adjustment
]
Adjust the amount of light emitted by the reflective/black mark sensor.
Available settings: -2–+2
4.
Media Sensor (Peeler) (RJ-3150/3150Ai only)
If RJ-3050/3050Ai was selected for [
Printer
], this item is unavailable. Specify the settings when the label peeler is used.
Adjust the precision of the sensor that detects whether the label has been peeled.
Available settings: -2–+2
Display Settings (1) Tab (RJ-3150/3150Ai only)
This appears only if RJ-3150/3150Ai is selected for [Printer].
RJ-3150
168 / 237
