II
- 7
2.1.5
Cutter Safety Lock Mechanism
When the cassette cover is opened and no tape cassette is loaded, the roller holder ASSY
is retracted from the thermal head with the roller holder release spring (as described in
Section 2.1.2). In this retracted position, the cutter lever stopper of the roller holder ASSY
blocks the end of the cutter lever, preventing the cutter blade from getting driven for safety,
as shown below.
Closing the cassette cover releases the cutter safety lock mechanism.
If you close the cassette cover, the roller holder ASSY pivots towards the thermal head so
that the cutter lever stopper does not interfere with the cutter lever.
Figure 2.1-8 Cutter Safety Lock Mechanism
Figure 2.1-9 Releasing the Cutter Safety Lock Mechanism
Summary of Contents for PT 1000 - P-Touch 1000 B/W Thermal Transfer Printer
