III -
15
Destination
Source voltage
Head rank
Destination
If the destination is Germany, for example, "GE" will appear on the LCD.
(The destination is determined by solder points 1 through 3.)
Solder points
Destination
The LCD
shows:
3
2
1
EUROPE/USA
GE
High
(Open)
High
(Open)
High
(Open)
Head rank
Solder points A and C customize the machine for the individual thermal head
properties. The LCD shows the current head rank as listed below.
If the print head unit is replaced with a new one, the soldered state may need to
be changed according to the head rank code printed on the head flat cable of the
new print head.
Solder points
Head rank
The LCD
shows:
A
C
A
A
Low
(Closed)
High
(Open)
B
B
High
(Open)
High
(Open)
C
C
High
(Open)
Low
(Closed)
Source voltage
This machine shows "X" when driven by dry cells or via the AC adapter.
If the source voltage is within the specified range (7.5 ±0.1 VDC), "O" will be
displayed; if out of the range, "X" will be displayed.
Summary of Contents for PT 1000 - P-Touch 1000 B/W Thermal Transfer Printer
