II
- 12
[ 2 ]
Solder Points
This machine has five solder points--1 through 3, A and C.
n
Destination
Solder points 1 through 3 customize the machine for destination. as listed in Table 2.2-1.
Table 2.2-1 Destination
Solder points
Destination
3
2
1
EUROPE/USA
High
(Open)
High
(Open)
High
(Open)
n
Head rank
Solder points A and C determine the power feeding period to the thermal print head to
customize the machine for the individual thermal head properties (head rank) as listed in
Table 2.2-2.
If the print head unit is replaced with a new one, the soldered state may need to be
changed according to the head rank code printed on the head flat cable of the new print
head.
Table 2.2-2 Head Rank
Solder points
Head rank code
printed on the head
flat cable
A
C
A
Low
(Closed)
High
(Open)
B
High
(Open)
High
(Open)
C
High
(Open)
Low
(Closed)
Summary of Contents for PT 1000 - P-Touch 1000 B/W Thermal Transfer Printer
