Brother PR-600 Manual Download Page 2 | Manualshive

Page: 2 / 227

background image

ii

FOR USERS IN THE UK, EIRE, MALTA AND CYPRUS ONLY

If this machine is fitted with a three-pin non-rewireable BS plug, then please read the following.

IMPORTANT

If the available socket outlet is not suitable for the plug supplied with this equipment, it should be cut
off and an appropriate three-pin plug fitted. With alternative plugs, an approved fuse must be fitted in
the plug.

NOTE

The plug served from the main lead must be destroyed as a plug with bared flexible cords is
hazardous if engaged in a live socket outlet. In the event that the plug fuse must be replaced, use a
fuse approved by ASTA to BS 1362, i.e. carrying the

mark, rating as marked on plug.

Always replace the fuse cover, never use plugs with the fuse cover omitted.

WARNING
DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH THE
LETTER ‘E’, BY THE EARTH SYMBOL

OR COLOURED GREEN OR GREEN AND YELLOW.

The wires in this main lead are coloured in accordance with the following code:

Blue

Neutral

Brown Live

As the colours of the wiring in the main lead of this appliance may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows.

The wire that is coloured blue must be connected to the terminal that is marked with the letter ‘N’ or
coloured black or blue.

The wire that is coloured brown must be connected to the terminal that is marked with the letter ‘L’
or coloured red or brown.

Sapphire.book Page ii Friday, August 1, 2003 9:12 AM

«
1
2
3
4
...
»

Summary of Contents for PR-600




































































































































































































































Reviews:

No comments

Related manuals for PR-600

Micropulse BTL5 Series

Brand: Balluff Pages: 16

Brand: Camtree Pages: 2

Brand: Camtree Pages: 11

Brand: Camtree Pages: 4

Brand: Warmup Pages: 4

Brand: Velleman Pages: 2

Brand: Velleman Pages: 9

Brand: S-BOL Pages: 3

Brand: Yakima Pages: 6

Brand: Yakima Pages: 18

Brand: Yakima Pages: 18

Limelight LL-EXTMOUNT-H

Brand: Lutron Electronics Pages: 4

Brand: JUKI Pages: 5

Brand: nedis Pages: 76

Brand: Orion Pages: 9

Brand: FAAM Pages: 19

Brand: UNITED Pages: 4

Brand: Thule Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands