Brother MFC-860 Owner'S Manual Download Page 81

Page: 81 / 200

Walk-Up PhotoCapture Centre

™

VIDEO PRINTING

If you selected INK JET:

Press

to select BROTHER (BP72CA) or OTHER (non-Brother ink jet) paper type,

and press

Set

To select QUALITY:

Repeat Step 3.

Press

to select NORMAL, HIGH or PHOTO, and press

Set

NOTE: See Choosing the Quality in Chapter 9.

To select PRINT SIZE:

Repeat Step 3.

Press

to to select (14.6x10.8), (10x7.6), 6x(10x7.6) or (20.3x15.2) and press

Set

To select COLOUR ENHANCE:

Repeat Step 3.

Press

to select ENHANCE:ON or ENHANCE:OFF, and press

Set

The MFC allows you to customize the colour enhance is set by using Function key if you select
ENHANCE:ON. (See Colour Enhancement in this Chapter.)

Press

Colour Copy

to return to the screen:

Select the number of copies you wish to make and
press

Colour Copy

If you are using non-Brother ink jet paper or Brother coated paper select INK JET.

■

The PhotoCapture Centre

™

only prints in colour, no Black & White printing is

available when using this feature.

■

Enlargement or reduction is not available while using the PhotoCapture
Centre

™

■

User settings are kept until media card is inserted. The PhotoCapture Centre

™

automatically goes back into its default setting after the media card is removed.

NO.OF COPIES:01

THEN COPY OR SET

Summary of Contents for MFC-860









































































































































































































Search results

Summary of Contents for MFC-860

Reviews:

Related manuals for MFC-860

Brands by name

Popular brands

Brother MFC-860, Owner'S Manual

Search results

Summary of Contents for MFC-860

Reviews:

Related manuals for MFC-860

Brands by name

Popular brands