manualshive.com logo in svg

Brother MFC-860, Owner'S Manual

Share
Download
Brother MFC-860 Owner'S Manual Download Page 191

   

183

APPENDIX

Fax Forwarding  Sends a fax received in memory to another preprogrammed fax number.

fax tones  The signals sent by sending and receiving fax machines while communicating 

information.

Fine Mode  Resolution is 196 x 203 dpi. It is used for small print and graphs.

Function Mode  The programming mode for changing the setting of your MFC.

grey scale  The shades of grey available for copying and faxing photographs.

group number  A combination of One Touch and/or Speed Dial numbers that are stored on a One 

Touch Dial key for Broadcasting.

Ink Management button  Cleans the print head and / or resets the ink dot counter after replacing 

an ink cartridge.

Journal  Lists information about the last 50 incoming and outgoing faxes. TX means Transmit. RX 

means Receive.

Journal Period  The preprogrammed time period between automatically printed Journal Reports. 

You can print Journal on demand without interrupting this cycle.

LCD (Liquid crystal display)  The display screen on the MFC that shows interactive messages 

during On-Screen Programming and defaults to the date and time when the machine is idle.

Memory Status List  Shows how much memory is being used, how much is left, and the type of 

messages in memory.

Memory usage  Instructs the MFC how to allocate the memory.

One Touch Dial  Keys on the MFC control panel where you can store numbers for easy dialling. 

You must use a separate key for each number.

Out of Paper Reception  Receives faxes into the MFC’s memory when the machine is out of paper.

Overseas Mode  Makes temporary changes to the fax tones to accommodate noise and static on 

overseas phone lines.

Pause  Allows you to place a 3.5 second delay in the dialling sequence stored.

Photo Mode  A resolution setting that uses varying shades of grey for the best representation of 

photographs.

Polling  The process of a fax machine calling another fax machine to retrieve waiting fax messages.

Pulse  A form of dialling on a telephone line.

Print reduction  Reduces the size of incoming faxes.

Quick-Dial List  A listing of names and numbers stored in One Touch and Speed Dial memory, in 

numerical order.

Real Time transmission  When memory is full, you can send documents in real time.

Remaining Jobs  You can check which jobs are waiting in memory and cancel jobs individually.

Remote retrieval access  The ability to access your MFC remotely from a touch tone phone.

Remote retrieval access code  The four-digit code that allows you to call and access your MFC to 

retrieve fax messages or change fax storage settings.

Resolution  The number of vertical and horizontal lines per inch. See: Standard, Fine, Super Fine, 

Photo, Colour Fax.

Ring Delay  The number of telephone rings before the MFC answers a call in Fax mode.

Summary of Contents for MFC-860









































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands