manualshive.com logo in svg

Brother MFC-860, Owner'S Manual

Share
Download
Brother MFC-860 Owner'S Manual Download Page 157

   Using the Brother MFC with a New Power Macintosh

®

 G3, G4 or iMac

™

/iBook   

149

PRINTER/SCANNER

Scanning Area

Set the Size to one of the following:

◆

Letter (8.5 x 11 inches)

◆

A4 (210 x 297 mm)

◆

Legal (8.5 x 14 inches)

◆

A5 (148 x 210 mm)

◆

B5 (182 x 257 mm)

◆

Executive (7.25 x 10.5 inches)

◆

Business Card (90 x 60 mm)

◆

Custom (User adjustable from 0.35 x 0.35 inches to 8.5 x 14 inches)

After you choose a custom size, you can adjust the scanning area. Click and hold the mouse button 
as you drag the mouse to crop the image. 

Business Card Size

To scan business cards, select the Business Card size setting (90 x 60 mm) and place the business 
card at the top centre of a carrier sheet.

When scanning photographs or other images for use in a word processor or other graphics 
application, it is a good idea to try different settings for the contrast, mode and resolution to 
determine which settings look best.

Miscellaneous

Brightness

Adjust the brightness settings to obtain the best image. The Brother TWAIN Scanner driver offers 
100 brightness settings (-50 to 50). The default value is 0, representing an “average” setting.

You can set the brightness level by dragging the slidebar to the right to lighten the image or to the 
left to darken the image. You can also type a value in the box to set the setting. Click OK.

If the scanned image is too light, set a lower brightness value and scan the document again.

If the image is too dark, set a higher 
brightness value and scan the document 
again. 

Contrast

The contrast setting is adjustable only when you have selected one of the grey scale settings, but it 
is not available when Black & White is selected as the Grey Scale.

Increasing the contrast level (by dragging the slidebar to the right) emphasizes dark and light areas 
of the Image, while decreasing the contrast level (by dragging the slidebar to the left) reveals more 
detail in grey areas. Instead of using the slidebar, you can type a value in the box to set the contrast. 
Click OK.

Width:

Enter the width of the custom size.

Length:

Enter the length of the custom size.

Summary of Contents for MFC-860









































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands