Brother MFC-860 Owner'S Manual Download Page 16

Page: 16 / 200

Multiple pages should be
fanned first as shown in
the diagram on the right.

Pull up the document stopper.

Using the Glass Platen
To use the glass platen, the ADF
must be empty.

Lift the document cover.

Using the document guidelines on the left, center the document FACE DOWN on the glass
platen.

Close the document cover.

If the document is a book or is thick, do not slam the cover or
press on it, as damage to the glass platen may result.

10 Faxing from the ADF (Automatic Document Feeder)

Insert the documents face up in the feeder.

Dial the fax number, then press

Start

11 Faxing from the Glass Platen

Place the document face down on the glass platen.

Dial the fax number, then press

Start

. The MFC starts scanning the first page.

Documents are

Face Up

Documents is

Face Down

Summary of Contents for MFC-860









































































































































































































Search results

Summary of Contents for MFC-860

Reviews:

Related manuals for MFC-860

Brands by name

Popular brands

Brother MFC-860, Owner'S Manual

Search results

Summary of Contents for MFC-860

Reviews:

Related manuals for MFC-860

Brands by name

Popular brands