manualshive.com logo in svg

Brother MFC-860, Owner'S Manual

Share
Download
Brother MFC-860 Owner'S Manual Download Page 70

62

   Chapter 10

10

Walk-Up Video Printing

Walk-Up Video Printing lets you use your MFC, connected to your camcorder, digital camera, video 
game, or VCR, to view a video on the attached equipment. The input is compatible with PAL video 
signal only.

Getting Started

With no documents in the feeder, plug the cable from your video camera’s Video Out jack into the 
MFC’s RCA pin jack. Play the video.

Auto Switch

Whenever you connect video equipment to the MFC and turn the video signal on, the MFC 

Copy

 

keys automatically switch to video printing mode 

and the screen displays

Some camcorders, digital cameras, video games or VCRs do not correctly 
conform with PAL standards. If they are not 100% PAL compatible then printing 
problems may be experienced. 

As soon as you turn off the video equipment or disconnect it, the Colour 
Copy keys return to normal copy mode. You cannot access video printing 
mode if you have too much in memory. Print out stored documents to free 
some memory to enable the video printing to work.

Video Keys

CAPTURE READY

VIDEO:PRESS COPY

Summary of Contents for MFC-860









































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands