Brother HL-1250 Technical Reference Manual Download Page 67

Page: 67 / 441

2001/10/02

CHAPTER 2 "PCL" - 47

Value

Font Style

0
1
4
5
8

24
32
64

128
160

Upright & solid
Italic
Condensed
Condensed italic
Compressed, or extra condensed
Expanded
Outline
Inline
Shadowed
Outline shadowed

10 REM ****** PRINT IN ITALIC & UPRIGHT STYLE ******

20 ESC$=CHR$(27)

30 WIDTH "LPT1:",255

40 REM --- PRINT USING AN ITALIC FONT ----

50 LPRINT ESC$+"(s1S";

60 REM --- PRINT FONT ----

70 FOR I=33 TO 127

80 LPRINT CHR$(I);

90 NEXT

100 LPRINT

110 REM --- PRINT USING AN UPRIGHT FONT ---

120 LPRINT ESC$+"(s0S";

130 REM --- PRINT FONT ----

140 FOR I=33 TO 127

150 LPRINT CHR$(I);

160 NEXT

170 LPRINT

180 REM -- PAPER EJECT ---

190 LPRINT CHR$(12);

200 END

5.2.11. Selecting the stroke weight

Esc(s#B (27)(40)(115)#(66) <1Bh><28h><73h>#<42h>

•

This command designates the stroke weight of the primary font.

Esc)s#B (27)(41)(115)#(66) <1Bh><29h><73h>#<42h>

•

This command designates the stroke weight of the secondary font

•

# is an integer between –7 and 7. A value of 0 signifies a medium stroke weight, negative numbers signify thin

or light stroke weights and positive numbers signify bold stroke weights.

•

If you select a light or bold stroke weight the command will only have an effect if the font is available in one of

the three font locations.

5.2.12. Selecting the typeface

Esc(s#T (27)(40)(115)#(84) <1Bh><28h><73h>#<54h>

•

This command designates the typeface of the primary font.

Esc)s#T (27)(41)(115)#(84) <1Bh><29h><73h>#<54h>

•

This command designates the typeface of the secondary font.

•

If the typeface you specify is not available in any of the three font source locations the printer will substitute

a font of a different typeface.

Summary of Contents for HL-1250


























































































































































































































































































































































































































































Search results

Summary of Contents for HL-1250

Reviews:

Brands by name

Popular brands

Brother HL-1250, Technical Reference Manual

Search results

Summary of Contents for HL-1250

Reviews:

Brands by name

Popular brands