Brother HL-1250 Technical Reference Manual Download Page 304

Page: 304 / 441

2001/10/02

CHAPTER 7 IBM PROPRINTER - 11

5.2.

Page Format

Set page length

EscCn

(27)(67)n

<1Bh><43h>n

This command sets the page length in lines.

EscCNULn (27)(67)(0)n

<1Bh><43h><00h>n

•

This command sets the page length in inches.

•

is the number of lines that make up one page, or the length of the page in inches, according to the

form of the command.

•

If the first form of the command is used (

= the number of lines in the page) the current line spacing

setting is used to determine the length of the page.

•

If the first form of the command is used,

must be in the range 1 to 255.

•

If the second form of the command is used (

= page length in inches ),

must be in the range 1 to

14.

LPRINT CHR$(27); CHR$(81); CHR$(22); 'Disable printer

Set left and right margins

EscXmn

(27)(88)mn

<1Bh><88h>mn

•

This command sets the left and right margins.

•

= the number of character positions at the current pitch (characters per inch) between the left edge

of the page and t he left margin.

•

= the number of character positions at the current pitch between the left edge of the page and the

right margin.

•

If you set

= 0 the current left margin setting is retained.

•

If you set

= 0 the current right margin setting is retained.

LPRINT CHR$(18); 'Set pitch to 10 CPI

LPRINT CHR$(27); CHR$(88); CHR$(10); CHR$(70); 'Set margins to 1" and

Set perforation skip

EscNn

(27)(78)n

<1Bh><4Eh>n

•

This command sets the bottom margin and enables perforation skip, that is, whenever the print

position reaches the bottom margin the printer performs a page eject and moves the print position to
the top of the next page.

•

= the number of lines at the current line space setting between the bottom edge of the page and the

bottom margin.

•

must be in the range 1 to 255.

•

Esc C

(set page length) and

Esc O

(Cancel perforation skip) cancel automatic perforation skip.

•

If the bottom margin is set to be above the top margin, the top margin is discarded and one line is

enabled for printing.

LPRINT CHR$(27); CHR$(78); CHR$(4); 'Set bottom margin to 4 lines.

Cancel perforation skip

EscO

(27)(79)

<1Bh><4Fh>

This command cancels the automatic perforation skip feature.

LPRINT CHR$(27); CHR$(79); 'Cancel perforation skip.

Summary of Contents for HL-1250


























































































































































































































































































































































































































































Search results

Summary of Contents for HL-1250

Reviews:

Brands by name

Popular brands

Brother HL-1250, Technical Reference Manual

Search results

Summary of Contents for HL-1250

Reviews:

Brands by name

Popular brands