Brother HL-1250 Technical Reference Manual Download Page 140

Page: 140 / 441

2001/10/02

CHAPTER 3 "PCL5C" - 10

COLOR PALETTES

3.1.

Set Color #1

Command

ESC*v#A (27)(42)(118)#(65) <1Bh><2Ah><76h>#<41h>

Range = -32767 ~ 32767
Default value = 0

•

This command sets the red value in the palette. Use the

Set Color to Palette

command to set the value

•

The value range to be set varies depending on the specified black/white reference.

3.2.

Set Color #2

Command

ESC*v#B (27)(42)(118)#(66) <1Bh><2Ah><76h>#<42h>

Range = -32767 ~ 32767
Default value = 0

•

This command sets the green value in the palette. Use the

Set Color to Palette

command to set the value.

•

The value range to be set varies depending on the specified black/white reference.

3.3.

Set Color #3

Command

ESC*v#C (27)(42)(118)#(67) <1Bh><2Ah><76h>#<43h>

Range = -32767 ~ 32767
Default value = 0

•

This command sets the blue value in the palette. Use the

Set Color to Palette

command to set the value.

•

The value range to be set varies depending on the specified black/white reference.

3.4.

Set Color to Palette

Command

ESC*v#I (27)(42)(118)#(73) <1Bh><2Ah><76h>#<49h>

Range = 0 ~ (2

- 1) (The value

is specified by the Bit/Index setting in the

Set PCL Color Setting

command.)

Default value = 0

•

This command sets the red, green and blue values which are set by the

Set Color #1, #2, #3

commands in the

palette.

•

When an out of range value is set, it is ignored in the palette.

•

This command sets the value which was set by the

Set Color #1, #2, #3

commands to 0.

3.5.

Select Color

Command

ESC*v#S (27)(42)(118)#(83) <1Bh><2Ah><76h>#<53h>

# = 0 ~ current palette size
Default value = 0

•

This command selects the color as the index number in the palette.

•

This command is valid for text, underline, rule and graphics.

•

This command does not affect the User-defined color pattern or HP-GL/2. (The HP-GL/2 command selects

the color using the SP command.)

•

The value to be selected by this command is never affected by the

Set PCL Color Setting,

Set

Render

Algorithm, Download Dither Matrix

Set Gamma Correction

commands.

Summary of Contents for HL-1250


























































































































































































































































































































































































































































Search results

Summary of Contents for HL-1250

Reviews:

Brands by name

Popular brands

Brother HL-1250, Technical Reference Manual

Search results

Summary of Contents for HL-1250

Reviews:

Brands by name

Popular brands