Brother HL-1250 Technical Reference Manual Download Page 439

Page: 439 / 441

2001/10/02

APPENDIX E REFERENCE LIST OF FS-5050 SERIES UNIQUE COMMANDS - 4

3.1.

Commands Descriptions

3.1.1. PJL output tray

Format

@PJL SET/DEFAULT OUTBIN=

TrayName

Parameter

TrayName*

•

FINISHER:

Select the tray of the Finisher/Stapler unit

Default = ALLSTACKER

Explanation

•

This command selects the Finisher/Stapler unit.

•

This command is ignored when the Finisher/Stapler unit is not available.

•

The difference between the SET and DEFAULT selection and the effective period of this setting follow the
PJL specifications.

3.1.2. PCL output tray

Command

Esc&l#G (27)(38)(108)#(71) <1Bh><38h><6ch>#<47h>

Parameter

# denotes the output tray.

•

100:

Select the Finisher/Stapler unit.

Default = 1

Explanation

•

This command selects the Finisher/Stapler unit.

•

This command is ignored when the Finisher/Stapler unit is not available.

•

The PJL OUTBIN command is ignored when this command is executed.

3.1.3. PS output tray

Command

<</BROutbinMode #>>setpagedevice

Parameter

•

Select the Finisher/Stapler unit.

Default = 0

Explanation

•

This command selects the Finisher/Stapler unit.

•

This command is ignored when the Finisher/Stapler unit is not available.

<</BROutbinMode 3>>setpagedevice

Summary of Contents for HL-1250


























































































































































































































































































































































































































































Search results

Summary of Contents for HL-1250

Reviews:

Brands by name

Popular brands

Brother HL-1250, Technical Reference Manual

Search results

Summary of Contents for HL-1250

Reviews:

Brands by name

Popular brands