Brother HL-1250 Technical Reference Manual Download Page 141

Page: 141 / 441

2001/10/02

CHAPTER 3 "PCL5C" - 11

3.6.

Push/Pop Palette

Command

ESC*p#P (27)(42)(112)#(80) <1Bh><2Ah><70h>#<50h>

# = 0 *

Push palette

= 1

Pop palette

* Default value = 0

•

The value of 0 pushes the current palette onto the palette stack. This command does not affect the current

palette.

•

The value of 1 pops the palette from the top of the palette stack and replacesthe current palette with it.

•

If the

Pop Palette

command is executed without a Push palette having first having been executed, it is

ignored.

•

The palette stack is controlled as a First In Last Out stack.

•

The parameters below are pushed to the palette stack;

Color Mode (Simple Color / PCL Color Mode)

Parameters to be set by the Set PCL Color Setting command

Encoding Mode (mode 0, 1, 2, 3)

Bits / index

Bits / value #1

Bits / value #2

Bits / value #3

Black and White Reference

Parameter of Render Algorithm

Parameter of Gamma Correction

Color Palette

Dither to be downloaded by the Download Dither Matrix command

Pen Width (HP-GL/2)

•

The data below is pushed to the palette stack;

Colors to be selected by the Select Color command

Colors to be selected by the Set #1, #2, #3 command

Monochrome Print Mode

Summary of Contents for HL-1250


























































































































































































































































































































































































































































Search results

Summary of Contents for HL-1250

Reviews:

Brands by name

Popular brands

Brother HL-1250, Technical Reference Manual

Search results

Summary of Contents for HL-1250

Reviews:

Brands by name

Popular brands