manualshive.com logo in svg

Brother HL-1250, Technical Reference Manual

Share
Download
Brother HL-1250 Technical Reference Manual Download Page 122

2001/10/02

 

CHAPTER 2 "PCL" - 102 

In a font status response, the "SELECT=" keyword line specifies the individual fonts. The font is identified by 
this line by specifying the font selection characteristics such as symbol set, spacing, pitch, height, style, stroke 
weight, and typefaces. It returns the "SELECT=" for all font types. 

In a status response, the five characters  "<", "E", "s", "c", and "&>" represent an escape character. 

Keywords following a "SELECT=" keyword mean the font specified by that "SELECT=" keyword. 

 

8.5.6.  Bitmap fonts 

For bitmap fonts, the printer returns the "SELECT=" line. This specifies the font selection features. For instance, 
the printer returns the printer's internal, bitmap, Roman-8 LetterGothic font as follows. 

PCL 

INFO FONTS 

SELECT"=<Esc>(8U<Esc>(s0p16.66h8.5v0s0b130T" 

 

8.5.7.  Bound scalable fonts 

For bound scalable fonts , an underscore( "...s1p__v0s...,") in the "SELECT=" line means it is a bound scalable 
font. Also, the related features are indicated. Either the height or pitch is indicated depending upon whether the 
font is proportional or fixed spaced. The printer, for instance, returns the printer's internal scalable Symbol font 
(proportionally spaced) as follows. 

PCL 

INFO FONTS 

SELECT="<Esc>(19M<Esc>(s1p__v0s0b16901T" 

 

8.5.8.  Unbound scalable fonts 

For unbound fonts , the printer adds the "SYMBOLSETS=" keyword to specify the symbol sets which can be 
used, as the symbol sets can also be used with an unbound font, and there is no symbol set sequence in the 
"SELECT=" line. The printer, for instance, returns the printer's internal unbound scalable Brougham (medium, 
fixed spaced) font and Pc Tennessee (bold italic, proportional spaced) fonts as follows. 

PCL 

INFO FONTS 

SELECT="<Esc>(s0p__h0s0b4099T" 

SYMBOLSETS="0D, 0I, 0N, 0U, 1E, 1F, 1G, ..." 

SELECT="<Esc>(s1p__v1s1s3b4101T" 

SYMBOLSETS="0D, 0I, 0N, 0S, 0U, 1E, 1F, 1G, ..." 

 

8.5.9.  Download fonts 

For download fonts (bitmap, bound scalable or unbound scalable),  the font ID number is included at the end of 
the "SELECT=" line.  For instance, the printer returns a downloaded bitmap Brougham with a font ID of 40 and a 
downloaded, unbound scalable, Dom Casual typeface with a font ID of 79 as follows. 

PCL 

INFO FONTS 

SELECT="<Esc>(8U<Esc>(s0p11.00h12.0v0s0b3T<Esc>(40X" 

SELECT="<Esc>(s1p__v1s0b5259T<Esc>)79X" 

SYMBOLSETS="0D, 0D, 0N, 0S, 0U, 1E, 1F, 1G, ..." 

 

8.5.10.  Location type 1 (currently selected) font 

For a status location type 1 (currently selected) font, the printer returns a single font, the printer font which is 
currently selected. The following are the keywords and data returned. 

The printer returns the "LOCTYPE=" and "LOCUNIT=" after the "SELECT=" line for every font. 

The "SELECT=" line changes for bound and unbound scalable fonts. 

For all scalable fonts, the actual size (height or pitch ) is indicated instead of the underscores.  For unbound 
scalable fonts, the symbol set which is bound to the font at present is indicated.  For all fonts, when the font is a 
secondary font, ")" replace the "(" characters in the "SELECT=" line. 

"LOCTYPE=" specifies the location type of the font which is selected at present. The value field of the Set Status 
Readback Type command is related to the value returned.  

Summary of Contents for HL-1250


























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands