Brother HL-1250 Technical Reference Manual Download Page 340

Page: 340 / 441

2001/10/02

CHAPTER 9 HP-GL - 15

EW - Edge wedge

EW r,q1,qc(,qd)[;]

r ; Radius in user units or graphics units

q1; Start point angle

qc ; Arc angle

qd ; Chord angle

•

Plots a wedge centred on the current position with radius

, start point angle

, arc angle

and chord angle

•

After plotting, the cursor returns to its point of origin.

•

Plotting is performed whether the pen is up or down.

•

When scaling has been performed, the circle is plotted in user units.

•

Also, when scaling has been performed, the value for r is a real number.

•

When there is no scaling, the circle is plotted in graphics units.

•

When there is no scaling, the coordinate value for

is an integer number.

•

The value for

is a clamped real number.

0° reference point

current

position

•

specifies the wedge starting point related to the 0 degree reference point.

•

When

is positive, the positive direction of the X axis relative to the current position is set at 0 degrees and

the start point is sought in the counterclockwise direction. The opposite occurs when

is negative: the

negative X axis is set at 0 degrees and the start point is sought by going clockwise.

•

specifies the angle of the wedge in degrees.

•

The value for

is a real number.

•

Plotting proceeds counterclockwise when

is positive and clockwise when negative.

•

The value for

is a clamped real number.

•

When

is not specified, the chord angle is the default value ( 5 degrees )

10 ' *** EWEX ***

20 LPRINT "IN;SP2;FT3,100;"

30 LPRINT "PA5000,4000;"

40 LPRINT "WG1250,90,180,5;"

50 LPRINT "SP3;EW1250,90,180,5;"

60 LPRINT "SP4,FT4,100,45;"

70 LPRINT "WG1250,270,120;"

80 LPRINT "SP3;EW1250,270,120;"

80 LPRINT "SP1;PT.3;FT1;"

100 LPRINT "WG1250,30,60;"

110 LPRINT "SP3;EW1250,30,60;PG;"

120 END

Summary of Contents for HL-1250


























































































































































































































































































































































































































































Search results

Summary of Contents for HL-1250

Reviews:

Brands by name

Popular brands

Brother HL-1250, Technical Reference Manual

Search results

Summary of Contents for HL-1250

Reviews:

Brands by name

Popular brands