2-9
Confidential
Error
Code
Contents
Refer to
page:
30
Carriage does not move. (Detected by the CR encoder sensor)
31
Cannot detect the origin of the carriage. (Detected by the CR encoder sensor)
32
35
38
3B
3C
3E
Any abnormality in the carriage motor, ASF motor, or paper feed motor.
3F
40
Casing internal thermistor defective. (Detects -20ºC or below or 80ºC or higher)
42
Head drive voltage dropped below the lower limit.
43
Head thermistor defective. (Detects -20ºC or below or 80ºC or higher when the
power is turned on)
44
Abnormal temperature of the print head driver.
46
Purge counter or flushing counter overflown.
48
Head flexible cable halfway inserted.
49
Abnormal head drive voltage. (Does not rise to the specified level)
4F
The head drive voltage has dropped from the high to low level in an abnormally
short period.
50
Purge cam switch does not come ON.
52
5A
Abnormal stop of purge cam being driven.
5B
Abnormal stop of pump in the maintenance unit.
5D
Driver IC overcurrent protection activated when the purge cam was being
driven.
5E
Driver IC overcurrent protection activated when the pump was in operation.
6C
Driver IC overcurrent protection activated during running of the ASF motor.
6F
ASF motor does not stop. (Keeps rotating for 15 seconds or more)
75
76
Summary of Contents for DCP-J925DW
