3-63
Confidential
Document scanning position sensor PCB ASSY
(23) Turn the ADF unit right side up.
(24) Press the lock arm to the front to release the front end of the document scanning position
sensor PCB and remove the PCB ASSY. Then disconnect the document scanning position
sensor harness from the PCB and release the harness from the cable guide provided on the
ADF unit
Assembling Note:
As shown below, route the document scanning position sensor harness
through cable guide "c." After taped together with the ADF harness ASSY, further route it
through cable guide "d."
(3_058)
ADF harness ASSY
(Bundle of ADF motor harness and its grounding wire,
document detection sensor harness, and
document scanning position sensor harness)
ADF unit
Document scanning
position sensor PCB ASSY
Lock arm
(Left)
Document scanning
position sensor harness (red)
ADF drive unit
(Rear)
ADF motor
(3_011)
ADF harness ASSY
ADF unit
Document scanning
position actuator
Cable guide "c"
Cable guide "d"
Document scanning
position sensor PCB ASSY
Document scanning
position sensor harness (red)
Document detection
sensor harness (white)
Document scanning
position sensor harness (red)
ADF motor harness (blue)
Grounding wire
Summary of Contents for DCP-J925DW
