Brother DCP-J925DW, Service Manual

Page: 55 / 378

2-10 Confidential
Error
Code
Contents
Refer to
page:
7A
Abnormal stop of purge cam during head capping. (When being driven in the
capping direction)
2-41
7B
Abnormal stop of purge cam during head uncapping. (When being driven in the
uncapping direction)
2-41
7D
Motor driver IC overcurrent protection activated when the purge cam was being
driven.
2-42
7E Head property data not entered. 2-42
80
Recording paper size error. (During fax/list printing) (The paper size not
suitable for recording fax was detected by the paper width sensor or registration
sensor.)
2-43
81
Recording paper size error. (Except during fax/list printing) (The paper width
sensor has detected that the paper width is less than the specified one.)
2-44
82
Recording paper jam in paper feeding. (The paper width sensor has failed to
detect the leading edge of paper.)
2-44
84
Recording paper jam in paper ejecting. (The registration sensor sticks to ON
even after completion of paper ejection.)
2-45
89
Paper width sensor has failed to detect the origin defined on the paper feed
roller.
2-45
8A PF encoder sensor cannot detect the rotation of the paper feed roller. 2-46
8B PF encoder sensor detects an abnormal stop of the paper feed roller. 2-46
8C
Driver IC overcurrent protection activated during running of the paper feed
motor.
2-47
8F Paper feed motor cannot stop. 2-47
90 Disc tray collided against an obstacle in the rear of the machine. 2-48
91 Pressure roller has failed to be released. 2-48
92 Pressure roller has failed to be depressed. 2-49
93 Disc size error. Or no disc is loaded on the disc tray. 2-49
A1 Document scanner unit opened. 2-50
A2 During ADF scanning, a document of 90 cm or longer is detected. 2-50
A3
During ADF scanning, the document scanning position sensor does not come
ON.
2-51
A5
Detected abnormal level data in the CIS scanning result during fax sending (1st
time).
2-51
A6
Detected abnormal level data in the CIS scanning result during fax sending
(retry).
2-51
A7 Mismatch between actual CIS type and EEPROM data. 2-52
A8 Color parameter matching error. (Used for debugging at the factory.) 2-52
AF CIS positioning error. (Home positioning failed) 2-53