manualshive.com logo in svg

Brother DCP 8060, Servise Manual

Share
Download
Brother DCP 8060 Servise Manual Download Page 487

Scanner Error Code

Define name

Error Code

Contents

SCDIAG_OK

0

The processing is completed or confirmation is successful.

SCDIAG_FAIL

1

The system stopped processing due to errors which don't fall into ones above, such as the lack of memory.

SCDIAG_NOT_INITIALIZE

2

The system tried to run functions without the initialization processing.

SCDIAG_NOT_SUPPORT

3

This Scanner driver type doesn't support the function which is tried to run, This confirmation of the function is not necessary.

SCDIAG_NOT_INSTALL

4

The specified device is not installed.

SCDIAG_NOT_CONNECTED

5

The specified device is not connected. (only USB connection)

SCDIAG_NOT_FOUND_DEVICE

6

The specified device is not found, No device may be connected or may fail to install.

SCDIAG_NOT_FOUND_TWDS

10

The specified TWAIN Data Source is not found, No device may be connected or may fail to install.

SCDIAG_NOT_SELECT_TWDS

11

The TWAIN Data Source Manager fails to recognize the default TWAIN Data Source.

SCDIAG_TWAIN_SYSTEM_ERROR

12

The TWAIN Data Source Manager to use the TWAIN protocol is not available.

The TWAIN Data Source Manager may not exist.

SCDIAG_STIDEVICE_CREATE_FAIL

20

The system failed to create the STI device.

The STI/WIA service or the minidriver may have problems.

SCDIAG_STI_SYSTEM_ERROR

21

The STI Interface (IStillImage) is not available.

The STI service may not start or the operation system may have problems.

SCDIAG_WIADEVICE_CREATE_FAIL

30

The system failed to create the WIA device.

The WIA service or the minidriver may have problems.

SCDIAG_WIA_SYSTEM_ERROR

31

The WIA Service (IWiaDevMgr Interface and so on) is not available.

The WIA service may not start or the operation system may have problems.

SCDIAG_OPEN_ERROR

40

The system failed to open the scanner device.

The attempt may be rejected because the object device is running or so.

SCDIAG_WRITE_ERROR

41

The system failed to send the scanner command.

SCDIAG_READ_ERROR

42

The system failed to read the data from the device.

SCDIAG_TIMEOUT

43

The system failed to receive the response after the request has timed out.

SCDIAG_NO_RSM

44

The system failed to recognize the Resource Manager and failed to restart.

The Resource Manager may not be installed or running incorrectly.

Scanner Error Code

Confidential

Summary of Contents for DCP 8060
















































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands