Brother DCP 8060, Servise Manual

Page: 331 / 495

Confidential 9-7
Error Code
(Hex)
Symptom Probable Cause Solution
The paper ejection
roller does not rotate
correctly Replace the paper ejection
roller.
Foreign materials in the
paper path. Remove foreign materials.
Registration sensor
actuator caught on the
surrounding parts Correct the surrounding
parts on which the
actuator caught.
Registration sensor
broken Replace the sensor PCB.
84 Recording paper jam.
(The registration sensor stays
ON after completion of paper
ejection operation.)
Main PCB defective Replace the main PCB.
85 No paper tray1 loaded. Tray 1 is not closed
completely. Close the tray1.
86 No paper tray2 loaded. Tray 2 is not closed
completely. Close the tray2.
87 Not used.
Recording paper not
loaded correctly Instruct the user to load
the recording
Registration sensor
broken Replace the registration
sensor.
Separation pad
damaged Replace the paper tray.
Objects, such as bits of
paper or chips, are in
the paper tray or paper
tray Remove the objects from
the paper tray.
Paper pick up roller
defective Replace the paper pick up
roller.
Paper feed motor
broken Replace the paper feed
motor ASSY.
88 Recording paper jam. (Even
after paper pulling-in
operation, the registration
sensor is still OFF.)
Main PCB defective Replace the main PCB.
89 Not used.
8A Jam tray2 Paper jams in tray2 Pull the jammed paper out
of the indicated area.
8B Jam tray1 Paper jams in tray1 Pull the jammed paper out
of the indicated area.
8C Jam MP tray Paper jams in MP tray Pull the jammed paper out
of the indicated area.
8D-A0 Not used.
A1 Front cover opened. Hook of the front open
switch on the front
cover broken Replace the front cover
switch.