Brother DCP-7030, Service Manual

Page: 54 / 315

1-36
Confidential
■
Black horizontal stripes
Fig. 1-7
User Check
• Clean the inside of the machine and the corona wire in the drum
unit.
• Replace the drum unit with a new one.
Step Cause Check Result Remedy
1
Dirt on the
charge electrode Are the electrodes on
the drum unit and
machine body dirty?
Yes
Clean both electrodes.
(
Refer to Fig. 1-1, Fig. 1-2. )
2
Paper tray
ground terminal
located in the
machine body Is the paper tray ground
terminal bent, which is
located in the machine
body?
(Refer to
Fig. 1-7 .)
Yes
Correct the bending of
paper tray ground terminal.
3
Toner attached
on the develop
roller Are the horizontal stripes
at 40.6 mm (develop
roller circumference)
intervals?
Yes
This problem will disappear by
printing approximate 10 pages.
If the same problem occurs,
replace the toner cartridge.
4
Scratch and Dirt
on the exposure
drum Are the horizontal stripes
at 75.0 mm (exposure
drum circumference)
intervals?
Yes
Replace the drum unit.
5
Scratch and Dirt
on the heat roller Are the horizontal stripes
at 78.5 mm (heat roller
circumference) intervals?
Yes
Replace the fuser unit.
6
HVPS PCB
failure Is the problem solved
after replacing the
HVPS PCB ASSY?
Yes
Replace the HVPS PCB
ASSY.
7
Main PCB failure Is the problem solved
after replacing the main
PCB ASSY?
Yes
Replace the main PCB
ASSY.
Paper tray ground terminal.
Bottom surface
of Paper tray