5. USING SD CARD
BAS-311H
48
5-13. Updating the control program version
1
Place the control program that you would like to update into the folder of the SD card as specified in “5-2”.
2
With the power switch turned off, insert the SD card into the SD card slot.
3
3226B
While holding down the RESET, TEST and
▲
keys, turn
on the power switch.
3209B
The same “bro”, “ther”, “-3” (may vary depending on
specifications) and “311” as appear in the PROGRAM
No. display, menu display, section No. display and
tension display will appear. Keep holding down the keys
until you hear a beep.
4
2678B
“1.Mn” will appear in the PROGRAM No. display and
“*.*.**” (control program version stored on the SD card)
will appear in the menu display.
5
3227B
Press the
△
or
▽
key to select the program to be
updated.
Control program
PROGRAM No.
display
Menu display
Mian [1.Mn] [*.*.**]
Motor
[2.Mt]
[*.**]
Panel [3.PL]
[*.**]
･
If there is no program to be updated which is stored
on the SD card, “----” (“---”) will appear in the menu
display.
6
“WAIT” will appear in the menu
display and the value in the
tension display will increment
while the program version is being
updated.
2680B 2681B
Press the ENTER key.
2414B
･
The buzzer will sound and updating of the program
version will start.
･
When “End” appears in the menu display, updating is
complete.
･
To continue updating another program, return to step
5 and select the next program to be updated.
7
Turn off the power switch.
