5. USING SD CARD
BAS-311H
39
5-4. [ r 1] Reading additional sewing data
1
3098B
Select the “ r 1” SD data read/write mode.
･
The number of the additional sewing data in the SD
memory card folder will appear in the tension display.
(The initial value displayed is “ALL”.)
2
3099B
Press the
or
key to select the number for the
additional sewing data that you would like to be read
(ALL, 100 to 999).
･
When “ALL” is displayed, all of the additional sewing
data will be read at once.
･
Only the data in the SD card folder corresponding to
the additional sewing data number will be displayed.
(If there is not a single item of data in the folder, “---”
will be displayed.)
3
While reading
The number for the additional sewing
data number which is currently being
read will appear in the tension value
display.
2657B 3100B
Press the ENTER key.
2414B
･
The buzzer will sound and the selected additional
sewing data will be read from the SD card and copied
into the sewing machine's internal memory.
･
If no additional sewing data exists, an error buzzer will
sound.
4
3101B
When the display returns to the status in step 1, reading
of the additional sewing data is complete.
･
If you would like to use any other read/write modes,
press the
△
or
▽
key to select the mode and then
run it.
5
Exit read/write mode
TEST indicator switches off
2404B
Press the TEST key.
*
Contact the place of purchase for information on other reading and writing modes.
For example, if the additional sewing data
to be read is for program No.100.
