5. USING SD CARD
BAS-311H
45
5-10. [ r 7] Reading sewing machine data
1
2669B
Select the “ r7” SD data read/write mode.
2
While reading
“MEM” appears in the tension
display while memory switch settings
are being read, the sewing data
number appears while additional
sewing data is being read, and “PrG”
appears while program data is being
read.
2670B 2663B
Press the ENTER key.
2414B
･
The buzzer will sound and the sewing program data,
cycle program data, memory switch settings and
additional sewing data will be read from the SD
memory card and stored in the sewing machine's
memory, and the sewing programs, cycle programs
and memory switch settings will be applied.
･
If no sewing program data or cycle program data
exists, an error buzzer will sound.
3
2669B
When the display returns to the status in step 1, reading
of the program data is complete.
･
If you would like to use any other read/write modes,
press the
△
or
▽
key to select the mode and then
run it.
4
Exit read/write mode
TEST indicator switches off
2404B
Press the TEST key.
