8. ADJUSTMENT
BAS-311H
103
5 <Motor-driven work clamp specifications>
Touch the bottom of the work clamp lifter plate
and check the position where it starts to lower.
1. Press
the
▲
or
▼
key to change the offset value (-999 to
999) so that the work clamp lifter plate (1) moves to the
position where it starts to lower.
The offset value in the menu display will flash, and “JoG”
will illuminate in the PROGRAM No. display.
2. Press
the
▲
key once to reduce the offset value by 1.
･
The work clamp lifter plate (1) will move in conjunction with
the setting value.
5206Q 2800B 2801B 2899B
<Pneumatic work clamp specifications>
1. Remove the rear cover, align the index marks of the work
clamp cam gear (2) and the work clamp driving gear (3) to
the center line, and then press the or key to change
the offset value (-999 – 999).
The offset value in the menu display will flash, and “JoG”
will illuminate in the PROGRAM No. display.
2. Press
the
▲
key once to reduce the offset value by 1.
･
The work clamp driving gear (3) will move in conjunction
with the setting value.
5207Q 2800B 2801B 2899B
For example, if the offset
value is -2.
Index mark
For example, if the offset
value is -2.
