Brother BAS-300F Series, Instruction Manual

Page: 82 / 228

Programmer
81
Chapter 2 Programming with Help Function
Moving in parallel
1. Select with and press .
2. Select with and press .
3. Move the work clamp with and press
when the needle point is at 2”.
4. Press three times.
Saving
For details of operation, refer to "Writing data to a floppy disk" (P.216).
1. Select with and press .
2. Select with and press .
3. Input the data number and press .
4. Press .
Ending program
1. Press .
When the movement in parallel is carried out in the midst of
the stitch data (position 6 between 2 and 3 in an example on
the left), the movement in parallel reaches the start point of
the next feed (position 3).
If the moving distance in parallel is 12.7 mm or less, the
movement in parallel carried out in the stitch data and if the
distance is more than 12.7 mm, the movement in parallel is
done in the feed data.
Start
1
2
3
4
5
6’’
3
’’
6
Pattern A Pattern B Pattern C
Feed
Feed