Brother BAS-300F Series Instruction Manual Download Page 127

Page: 127 / 228

126

Programmer

Chapter 3 Programming with Command Function

Copying in the reverse direction

Moving data in parallel before the current needle position (changing the moving
amount data of the needle position)

Moving data in parallel after the current needle position (using needle drop data to
the moved position)

Setting attribute

Setting the number of feed boundaries to be ignored (0 - 99)

Stopping the needle at the upper end (only when the needle position is at split)

Stopping the needle at the lower end (only when the needle position is at split)

The maximum sewing speed becomes 400 rpm or lower.

The maximum sewing speed becomes 1200 rpm or lower.

The maximum sewing speed becomes 800 rpm or lower.

The maximum sewing speed becomes 600 rpm or lower.

Cancels low speed data setting

Turns on option output 1.

Turns on option output 2.

Turns on option output 3.

Turn off all option outputs.

Not breaking thread for feed (only when the needle position is at feed)

Breaks thread for feed (only when the needle position is at feed)

Other operations

Returning from pattern image to the setting screen.
Returning from error message to the previous screen.

Displaying data image

Turning on (off) the programmer

Canceling command

Summary of Contents for BAS-300F Series





































































































































































































































Search results

Summary of Contents for BAS-300F Series

Reviews:

Related manuals for BAS-300F Series

Brands by name

Popular brands

Brother BAS-300F Series, Instruction Manual

Search results

Summary of Contents for BAS-300F Series

Reviews:

Related manuals for BAS-300F Series

Brands by name

Popular brands