Brother BAS-300F Series Instruction Manual Download Page 142

Page: 142 / 228

Programmer

141

Chapter 3 Programming with Command Function

2. Connect each direction change point on the

inside line with the matched direction change
point on the outside line using a line.

3. Provide one point (or more points) between the

above two direction change points, and connect
them using a line.

Follow the procedure for curve points specification.

Specify points in pairs on the inside and outside

lines. The lines should be spaced uniformly.

Programming

Press

The work clamp moves to the home position and

the programmer screen is displayed.

Move the work clamp with

. Press

when the needle point is at point 1 of the
pattern.

The first stitch (point 1) is programmed.

3. Press

and

8 9

Summary of Contents for BAS-300F Series





































































































































































































































Search results

Summary of Contents for BAS-300F Series

Reviews:

Related manuals for BAS-300F Series

Brands by name

Popular brands

Brother BAS-300F Series, Instruction Manual

Search results

Summary of Contents for BAS-300F Series

Reviews:

Related manuals for BAS-300F Series

Brands by name

Popular brands