Brother BAS-300F Series, Instruction Manual

Page: 140 / 228

Programmer
139
Chapter 3 Programming with Command Function
Ending program
1. Press .
Zigzag stitch
Zigzag stitch is programmed. The example in the left is used
for explanation of even width of zigzag stitch on the sewing
path.
Zigzag with curves may be programmed.
Programming
1. Press .
The work clamp moves to the home position and
the programmer screen is displayed.
2. Move the work clamp with . Press
when the needle point is at point A of the
pattern.
The first stitch (point A) is programmed.
3. Press and press .
is the command for the zigzag stitch.
Input the width of the zigzag stitch in . 3.0
mm is input in the example.
4. Input the stitch length and press .
3.0 mm is input in the example.
Input 030 to make the stitch length to 3.0 mm.
5. Move the work clamp with . Press
when the needle point is at point B
of the pattern.
Zigzag stitch with even width to the left and the
right is programmed.