Brother BAS-300F Series Instruction Manual Download Page 181

Page: 181 / 228

180

Programmer

Chapter 3 Programming with Command Function

Create a pattern data.

Move the needle with

, then press

for setting.

Input the end code.

Low-speed sewing

Carry out setting for low-speed sewing.

Command to be used

The maximum sewing speed becomes 400 rpm or lower.

The maximum sewing speed becomes 1200 rpm or lower.

The maximum sewing speed becomes 800 rpm or lower.

The maximum sewing speed becomes 600 rpm or lower.

Canceling setting for low speed data

Move to the desired needle position for setting.

Refer to “Moving needle point” (page 123).

Select the type of low speed sewing and input the command.

If multiple settings are required, input the stitch counts in 3 digits continuously and press

Summary of Contents for BAS-300F Series





































































































































































































































Search results

Summary of Contents for BAS-300F Series

Reviews:

Related manuals for BAS-300F Series

Brands by name

Popular brands

Brother BAS-300F Series, Instruction Manual

Search results

Summary of Contents for BAS-300F Series

Reviews:

Related manuals for BAS-300F Series

Brands by name

Popular brands