Brother BAS-300F Series Instruction Manual Download Page 13

Page: 13 / 228

Programmer

Chapter 1 Preparations of operation

Handling of floppy disk

Do not force open the shutter for direct contact
with the magnetic area.

Do not bring disks near magnetic matters
such as magnetic screwdriver or the back
side of the programmer.

Do not store floppy disks in an extremely high
or low ambient temperature.

Do not use floppy disks under high humidity.

Do not use or store floppy disks in a dusty
place.

Do not store floppy disks under direct
sunlight.

Do not bend the disk. Do not put things on the
disk.

Avoid contact with solvent or drink.

Do not remove the disk out of the drive during
the access lamp is lit.

Summary of Contents for BAS-300F Series





































































































































































































































Search results

Summary of Contents for BAS-300F Series

Reviews:

Related manuals for BAS-300F Series

Brands by name

Popular brands

Brother BAS-300F Series, Instruction Manual

Search results

Summary of Contents for BAS-300F Series

Reviews:

Related manuals for BAS-300F Series

Brands by name

Popular brands