Brother BAS-300F Series Instruction Manual Download Page 32

Page: 32 / 228

Programmer

Chapter 2 Programming with Help Function

Curve

The pattern with curves is programmed.
The example in the left is used for explanation of
programming at the curve and the corner.

Be sure to press

twice for a split at corner points C or E. If a split is not made, the corner will

be round.

When a split is made

When a split is not made

More intermediate points such as points B, D, F or G will create smooth curves.

Programming

Press

The work clamp moves to the home position and

the programmer screen is displayed.

Select

with

and press

Move the work clamp with

. Press

when the needle point is at point A of the

pattern.

The first stitch (point A) is programmed.

Select

with

and press

Summary of Contents for BAS-300F Series





































































































































































































































Search results

Summary of Contents for BAS-300F Series

Reviews:

Related manuals for BAS-300F Series

Brands by name

Popular brands

Brother BAS-300F Series, Instruction Manual

Search results

Summary of Contents for BAS-300F Series

Reviews:

Related manuals for BAS-300F Series

Brands by name

Popular brands