Brother ArtCity140 Service Manual Download Page 135

Page: 135 / 151

4 - 17

Adjust

ment

Adjustment

Adjustment

Left straight stitch needle drop and
zigzag stitch maximum left needle drop position

8. Turn the pattern selecting dial until the [11] is the topmost position.

9. Turn the pulley by hand and lower the needle bar until the needle point comes near the paper.

10. Loosen the screw of the pattern selecting unit assy.

11. Insert a flat screwdriver into the notch part of the plate, and move the plate by turning a flat screwdriver, and move

the needle point left and right. And adjust them so that the pinhole on paper matches up with the needle point.

*Key point

• Turn a flat screwdriver to the direction “

”.

→

Move the needle point to right side.

• Turn a flat screwdriver to the direction “

”.

→

Move the needle point to left side.

12. Tighten the screw of the pattern selecting unit assy.

*Key point

• Need to adjust

“4-11 Needle interference left/right”

after this adjustment.

Pattern
selecting dial

Pulley

Paper

Needle bar

Screw M3X8

Hex wrench
2.5 mm

Screw

Flat screwdriver

Needle

Match up a pinhole with the needle point.

Summary of Contents for ArtCity140
























































































































































Search results

Summary of Contents for ArtCity140

Reviews:

Related manuals for ArtCity140

Brands by name

Popular brands

Brother ArtCity140, Service Manual

Search results

Summary of Contents for ArtCity140

Reviews:

Related manuals for ArtCity140

Brands by name

Popular brands